Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Swarm Storage has significantly increased the efficiency of refreshing cluster hardware and retiring whole chassis. The processes for retiring volumes and cleaning up over-replication have been are optimized. (SWAR-7765)

  • For implementations that deliver content directly over the web, Swarm Storage now provides cluster settings for restricting which headers are returned for GET and HEAD responses, using either a whitelist or blacklist approach. Filtering the response headers best serves those needing to conserve bandwidth (eliminating as many bytes as possible when serving content) and those needing enhanced security (to reveal as little as possible about the content and its context). (SWAR-7695)
    See Filtering Headers.

...

  • OSS updates

    • The Linux Kernel has been is updated to 4.4.104 and Linux Firmware to 1.170. (SWAR-7813)

    • Intel network drivers are updated to e1000e 3.4.0.2-NAPI, i40e 2.4.3, i40evf 3.4.2, igb 5.3.5.12, ixgbe 5.3.4, and ixgbevf 4.3.2. (SWAR-7810)

    • The mpt3sas/mpt2sas device driver is updated to 15.00.00.00. (SWAR-7882)

    • The mpt3sas device driver now has the prot_mask driver option set to 1 (which is the legacy T10 protection level) to support newer hardware. (9.5.1: SWAR-7936)

    • Driver support is added for Mellanox ConnectX-4 network adapters. (9.5.3: SWAR-8019)

  • Resolved Issues

    • The cache control header If-None-Match cannot be applied to multipart upload initiations and completes. (SWAR-7809)

    • Setting rMemDefault and rMemMax via SNMP had no effect. (SWAR-7766)

    • Resolved the issue that caused Swarm 9.4.0 to have longer than normal boot times. (SWAR-7779)

    • Replication feed performance was sometimes reduced after an upgrade to 9.3.0. (SWAR-7869)

    • Periodic health report production generates log ERROR messages and does not send the report. (SWAR-7780)

    • Listing queries involving the name.lower field provide incorrect results. (SWAR-7745)

    • Feeds become blocked and require DataCore Support assistance to unblock them. (SWAR-7837)

    • Enumerating volumes on a chassis fails in clusters where a volume or chassis had been taken offline. (SWAR-7751)

    • A multipart upload by APPEND loses custom metadata when a key had multiple values, leaving only the last value. (SWAR-7802)

    • Storage UI errors occur due to a chassis or volume being offline. (SWAR-7751)

    • Closed a security vulnerability on port 90, used by the legacy Admin Console. (9.5.2: SWAR-7962)

...